Lights Out! Turning on New Options in Lighting

Lights Out!

There’s a reason that film directors, when making movies, first call for LIGHTS before CAMERA and ACTION. Lighting sets the tone for the entire picture. Soft lighting makes a pretty face even prettier (or a not-so pretty one, not half-bad). Saturation produces a dream-like effect. And well-placed shadows, of course, bring out the horror in horror films.

While it may seem a stretch to compare the lobby of your condo to a major motion picture, the two have one thing in common: lights mean everything. When thinking of interior design, most people think about things like wall treatments, furnishings, and where to put the couch relative to the coffee table. Lighting doesn't always spring to mind right away. But how we light our living spaces—including the common areas of multifamily buildings and condominiums—make a huge difference in the mood, warmth, and even the perceived size of a space.

All those things can impact “curb appeal,” and by extension, value. There are a million ways to light a hallway, lobby, or common room, and a host of professionals specializing in just that.

Out of the Dark

How important is lighting to the overall atmosphere in a building’s common areas? “In a word: critical,” says Marilyn Sygrove, president of Sygrove Associates Design Group Inc., in Manhattan. “It makes the difference between tenement and luxury.” If you think that’s an exaggeration, you’ve never flipped through those tabloids where they have pictures of stars with no makeup—and bad lighting.

“Lighting is extremely important,” adds Bonnie Glassman, showroom manager at Union Lighting and Supply Company in Union. “I think it brightens up a living space and it can also affect your mood.”

“With respect to overall atmosphere, well-lighted common areas of a building are extremely important,” adds Pamela Merklinger, director of builder sales at Warshauer Electric Supply Company in Tinton Falls.

“A common area should be designed to create a safe and comfortable space with adequate lighting, utilizing energy saving fixtures and lighting controls,” she says. “This is a typical concern of building managers and residents. For instance, a lobby or hallway that features ambient lighting using energy efficient decorative fixtures and accent lighting using energy efficient wall sconces will create an aesthetically pleasing space that can be controlled to maximize energy savings.”

Time was, there was one kind of light bulb: an incandescent, the kind we were told that Thomas A. Edison invented in his Menlo Park, New Jersey lab (although a number of other inventors came up with similar ideas). You got to choose between 40, 60, or 100 watts, although you could sometimes find a dimmer bulb to use in your refrigerator—or, if you were a detective, a brighter one to hang from a fixture on the ceiling in your interrogation room.

But now it’s lights out for incandescent bulbs. On January 1st, the federal government passed legislation that bans traditional 40 and 60-watt incandescent light bulbs for general lighting in favor of more energy-efficient lighting options.

There are still a dizzying array of options available: fluorescents, compact fluorescents (CFLs), halogens, LEDs, and more. These days, the light bulb aisle at Lowe’s has as many choices as a Build-a-Bear.

“In the past, consumers have used wattage to rate the brightness of a lamp,” explains Joan Silver of Capitol Lighting, one of the nation’s leading retailers for residential lighting. “However, wattage is not an accurate indicator of lamp brightness. Energy-efficient light sources such as compact fluorescent lamps (CFLs) have much lower wattage while still producing a great amount of light. Wattage is simply a measure of the amount of energy consumed.” This why you can buy a CFL bulb that is 40W, and it’s bright enough to use to do makeup. The more accurate measurement, in terms of light brightness, is lumens. “As more consumers become aware of this common misconception, lumens will become one of the most important factors in lamp selection,” Silver explains.

Seven watts of LED gives off the same amount of light as 13 watts of a fluorescent, or 30 watts of an incandescent bulb. If there are, say, 100 60-watt incandescent bulbs all over the building, replacing them with LED bulbs save 4,600 watts of energy. That adds up to real money in a co-op, condo or HOA’s energy bill.

But the most important factor in buying light bulbs is color temperature. “The quality of the lights, including the color, sets the tone and the ambiance of the building,” says Philip Finkelstein, president of Illuminations in Rockville Center.

In this case, “color” does not refer to actual color, but rather the brightness of the bulb. Color, Sygrove says, is measured in kelvin. For example, “4,200 K is daylight,” she explains. And, 2,700 is warm light. There are options in between, 3,000, 3,100. We typically like to stay in the 3,000 to 3,500 kelvin range.”

Since the primary purpose of light is to allow us to see, bright light may seem the most desirable to the layperson. But what works perfectly well in the emergency room of a hospital might not be the most aesthetic solution to creating a pleasant mood in your sitting area. One does not propose to one’s beloved under the harsh glare of a 4,200 kelvin-lit room. Candlelight equals romance.

Then there is price. LED bulbs are more expensive than old-school ones, but they last much longer and save considerable money in energy bills. And they are not as pricey as they once were. “You can go to Home Depot and buy LED bulbs that are in a very competitive price range,” Sygrove says, “but it’s limited in color types. You can get very warm or cold. It’s comparable with the price of fluorescents.”

How is all of this information used by professionals to light common areas?

Light It Up

With so many different kinds of bulbs, and different kinds of fixtures—and different budgets—the possibilities are almost limitless.

“Lighting is a universal element,” says Sygrove. “It’s used to enhance all of the other components that make up an interior space.”

“For lobbies, we like a variety of lighting,” Sygrove says. “Overhead general illumination for the open areas, with more mood-setting lights in lounge areas, whether it’s sconces or table lamps.” This is also used on landings, near elevator doors, and in other small common areas throughout the building. If there is a doorman area, it would be lit overhead and underneath, she says, for function.

But this is general. All lighting is determined by the aesthetic of the building. “The design scheme is what determines the lighting,” Sygrove says. “If the client wants to go modern, recessed lighting that is not decorative is used, whereas a client who wants a more traditional or period look of the building would opt for something more decorative.”

“There’s so many variables,” Sygrove says. “We like to show clients a mock-up before they purchase the fixtures.” It’s easy for me, she says, to write about blue lights that aren’t actually blue, or to suggest where those lights may be seen in the outside world; it’s another thing, though, to actually see how they look in your lobby.

Aesthetically-Speaking

That brings up a key point: lighting is more complicated than it initially appears. The answer to the old question of how many board members it takes to change a light bulb is less obvious than it seems. There are plenty of mistakes that are often made.

“Some of the more common mistakes I have seen in buildings are inadequate lighting for the space and outdated, inefficient light fixtures that are expensive to operate,” says Merklinger. “Additionally, many buildings fall short of using lighting controls.”

Finally, aesthetics do matter. “Overlighting is just as bad as underlighting,” Sygrove says.“

“Lighting in New Jersey tends to be more traditional,” says Glassman. “Brass chandeliers are really outdated. A lot of people around here are into the bronzes, wrought iron and brushed nickel are really popular.

Research your options and choose your lighting wisely. “An energy assessment, or lighting evaluation can be performed to determine which inefficient fixtures are being used and how replacement options can reduce energy costs,” says Merklinger. “Replacement options using the latest technologies in LED are the most energy efficient and they’ve changed the way we design lighting. We specialize in this service and have saved building owners thousands of dollars.”

Boards and HOAs are always looking for ways to cut costs. Lighting is the perfect place to begin. So much money can be saved over time by making improvements to the fixtures and bulbs that it’s cost-effective. And in the long term, you should hire a professional lighting designer, who can help you see the light.    

Greg Olear is a freelance writer and a frequent contributor to The New Jersey Cooperator. Staff writer Christy Smith-Sloman also contributed to this article.

Related Articles

Senior housing RGB color icon. Nursing home. Retirement comfort dwelling. Elderly people healthcare treatment. Residence for pension. Old family social support. Isolated vector illustration

Okay, Boomer

NYC the 6th Most Rapidly Aging US City

Cryptocurrency vector concept: Young couple buying new house online and paying with bitcoin on mobile phone

Real Estate, Cryptocurrency, & Taxes

Can You Buy a Co-op With Crypto?

Smart house system programming software. Engineering development of building construction, communication, electricity. Design in CAD programs of Smart building. AI of IOT. Architectural 3d plan.

Futurizing Multifamily Buildings

New Materials, Standards, & Designs